šgÓ­¹âÅRÖЙC™CеÖÆÔìÓÐÏÞ¹«Ë¾£¡£¡£¡
 
 
Current position¡ú¡ó 60030 bucket wheel reclaimer ¡ï Back to catalogue¡ï
¡ò Last¡ò
¡¡ÒŽ(gu¨©)¸ñ¼¼Ðg(sh¨´)…¢”µ(sh¨´)
£¨üc“ô·Å´ó£©
Technical requirements
1.The cart running and turning both adopt the adjustment with frequency conversion
2.The driver¡¯s room could control the reclaiming, suspension arm belt conveyor and aspersion and lighting and which could be concentrated controlled in the ground central control room.
3.The weight tray and the running mechanism cover shall both be painted with safety mark (chute alternating with yellow and black colors).
4.After the installation of the roller and the carrier roller, they shall rotate flexibly without any lock or touch
5.The balance weight is subject to the debugging and the principle is to ensure the realization of the idle amplitude movement. The automatic arm support pitch-up is at any time prohibited in any position
6.After the installation of the electric equipments, they must accord with the technical performance requirements
7.The lighting equipments shall be configured according to the clients¡¯ practical conditions
8.Plate shall be set at the obvious place for the machine and the size and technical requirements shall meet with the JB8-82 stipulation
9.This machine could work together with reclaimer on the same line without conflict.
10.Means of power supply: the products of our company adopt the safety sliding line, which is safe and energy-saving with long service life and without worries for inspection.
11.The cost of the safety sliding line is not within the range of the whole machine, which shall be otherwise set in another contract.
Main technical performance table

Throughput

Reclaiming

Coal200-250t/h

Material proportion

Coal0.9t/m3
ore300-500t/h
µVʯ£¬2.50.9t/m3

Reclaiming height

Upper rail

8.3m

Granularity

¡Ü80

 Lower rail

0.4m

Rail type

50kg/m

Bucket wheel reclaiming equipment

 Bucket capacity

0.19m3

 Bucket wheel diameter

2.8m

Bucket quantity

10‚€

Rotation speed

6.5r/min

Rotation mechanism

Rotation angle

¡À150¡£

Rotation radius

30M

Rotation speed

0-20m/min

Amplitude mechanism

Amplitude angel

Face upward

+8¡£

Descend

-10¡£

Suspension arm belt

Belt speed

1.25m/s

Belt width

800mm

Running mechanism

Tread

7M
Maximum wheel pressure
£¼230KN
Running speed
0-30m/min

Gauge

5M

Electric equipments

Voltage

380V

Maximum power

87KW

Frequency

50Hz

 Means of power supply

Cable reel
Working condition
Working wind pressure
Non-working wind pressure
Operation temperature
250Pa
800Pa
-20¡£ +50¡£
10
QL200.30.10

 Active balance weight

1
13115
13115
9
QL200.30.9

Electricity

1
1090
1090
8
QL200.30.8

Running mechanism

4
9450
9450
7
QL200.30.7

Ground beam

2
5735
5735
6
QL200.30.6

 Rotation institution

1
19134
19134
5
QL200.30.5

 Driver¡¯s room

1
2200
2200
4
QL200.30.4

 Gantry

1
18100
18100
3
QL200.30.3

Arm stander

1
8140
8140
2
QL200.30.2

Hydraulic pressure pump station

1
1820
1820
1
QL200.30.1

Bucket wheel

1
Material
1200
1200