šgÓ­¹âÅRÖЙC™CеÖÆÔìÓÐÏÞ¹«Ë¾£¡£¡£¡
 
 
Current position¡ú¡ó Swing feeder ¡ï back to catalogue¡ï
¡ò£¨ÒŽ(gu¨©)¸ñ¼¼Ðg(sh¨´)…¢”µ(sh¨´)£©
£¨click for zoom-in£©
explanation
1¡¢The electric source is the supplied by soft wire to manipulate the equipments.
2¡¢When the handspike baffle of the swing feeder rises to push the coal slot flashboard, lock and fix it with the handspike handle to prevent the fall during the working of the baffle.
3¡¢When the feeder is charging the materials, tighten the rail clamping device with the rail channel to prevent the digression of the feeder.
4¡¢Drill the §æ80 hole on the frame steel plate according to the detailed position of the rail clamping device¡¯s grease cup in installation.
5¡¢When installing the retaining switch, install and fix it on the frame according to the general figure (11F219-2) and the retaining switch assembly figure (11f240-92).
6¡¢When the strobe is started, if one side of the feeder driver is found to be placed with the heavy things, then the wheel pressure shall be increased to reduce the sliding phenomenon.
7 ¡¢When the feeder is assembled, weld the electric switch box on the frame.
purpose
conveyed materials
material granularity
productivity
Current category and voltage (V)
swing mechanism
Motor
decelerator
open-aa gear
detent
walking speed
Motor
decelerator
type
power£¨KW£©
revolution rpm
type
speed ratio
teeth number
type
type
power£¨KW£©
revolutionrpm
type
speed ratio
bent axle revolutionr.p.m
wabbler journey(mm)
TJ2-200
Trip wheel diameter
28
56
200mm
feed the coal on the glue conveyor
ú
0-200mm
350-400T/h
380
Y132 M2-6-B3
5.5
950
ZQ35-25-IIK
24.42
modulus
speed ratio
electromagnet type
15.4
Y132 M2-6-B3
5.5
950
ZQ40-16-IVE
16.46
58.3
180
8
2
MZD1-200
 
15
NutAM10
A3
4
0.011
0.044
GB52-76
14
BoltM10x30
A3
4
0.029
0.116
GB30-76
13
Shaft joint cover
1
4.93
4.93
11F240-115
12
clamping device I
1
53
53
11F240-111
11
clamping device II
1
67
67
11F240-97
10
Driver equipment
1
224
224
11F240-94
9
Retaining switch equipment
2
6.5
13
11F240-92
8
Baffling wheel assembly
4
22
88
11F240-88
7
Driven wheel equipment
1
175
175
11F240-79
6
Riding wheel equipment
2
113
226
11F240-70
5
Running transmission mechanism
1
369.7
369.7
11F240-67
4
Swing mechanism
1
600
600
11F240-49
3
Shaking apparatus
1
413
413
11F240-45
2
Handspike
1
81
81
11F219-3
1
Frame
1
2461
2461
11F240-3
SN
Name
Material
Quantity
single piece
total
Standard no.
Drawing No.
Remark
Weight(Kg)
Material table
total Weight
4776